Product Guide
Analyzer Capabilities
Every ETI online analyzer measures material on the conveyor belt in real time — no sampling, no lab delays. This table shows which measurements each instrument provides so you can match the right analyzer to your application.
Energy Technologies Inc. — energytechinc.com
Online Analyzer Capabilities Comparison
Measurement Capabilities by Model
An analyzer that measures a parameter is marked with a check. Cement-only parameters apply to the Model 730 FSEA when configured for cement raw mix applications.
| Parameter | Model 500Nuclear Belt Scale | Model 510BTU Meter | Model 520Slurry Analyzer | Model 410MAsh Analyzer | Model 730FSEA |
|---|---|---|---|---|---|
| Weight / Density | |||||
| BTU / Heating Value | |||||
| Ash Content | |||||
| Moisture (H₂O) | |||||
| Sulfur | |||||
| Carbon | |||||
| Chlorine | |||||
| Mercury | |||||
| Nitrogen | |||||
| SiO₂ (Silica) | |||||
| Al₂O₃ (Alumina) | |||||
| CaO (Lime) | |||||
| Fe₂O₃ (Iron Oxide) | |||||
| MgO (Magnesia) | |||||
| SO₃ | |||||
| K₂O | |||||
| Na₂O | |||||
| MnO₂ | |||||
| TiO₂ | |||||
| Base-to-Acid Ratio | |||||
| C₃S(Cement only) | |||||
| C₂S(Cement only) | |||||
| C₃A(Cement only) | |||||
| C₄AF(Cement only) | |||||
| Alumina Ratio(Cement only) | |||||
| Silica Ratio(Cement only) | |||||
| Loss on Ignition(Cement only) | |||||
| Lime Saturation Factor(Cement only) |
Nuclear Belt Scale
- Weight / Density
BTU Meter
- Weight / Density
- BTU / Heating Value
- Ash Content
- Moisture (H₂O)
Slurry Analyzer
- Weight / Density
- Ash Content
Ash Analyzer
- Weight / Density
- BTU / Heating Value
- Ash Content
- Moisture (H₂O)
FSEA
- Weight / Density
- BTU / Heating Value
- Ash Content
- Moisture (H₂O)
- Sulfur
- Carbon
- Chlorine
- Mercury
- Nitrogen
- SiO₂ (Silica)
- Al₂O₃ (Alumina)
- CaO (Lime)
- Fe₂O₃ (Iron Oxide)
- MgO (Magnesia)
- SO₃
- K₂O
- Na₂O
- MnO₂
- TiO₂
- Base-to-Acid Ratio
- C₃S(Cement only)
- C₂S(Cement only)
- C₃A(Cement only)
- C₄AF(Cement only)
- Alumina Ratio(Cement only)
- Silica Ratio(Cement only)
- Loss on Ignition(Cement only)
- Lime Saturation Factor(Cement only)
About Each Instrument
All ETI analyzers are cross-belt or in-pipe instruments — they measure the full material stream continuously, with no sample extraction and no process interruption.
Model 500 Nuclear Belt Scale
Measures bulk material weight and density on a conveyor belt using a sealed Cs-137 gamma source. Non-contact, no moving parts, ±0.5% accuracy. The foundation measurement for any conveyor instrumentation system.
View full specifications →Model 510 BTU Meter
Measures ash content, moisture, heating value (BTU), and density of coal in a vertical feeder pipe using dual-gamma attenuation. Updates every 3 seconds. Designed for coal-fired power plants and industrial boiler applications.
View full specifications →Model 520 Slurry Analyzer
Measures slurry density and ash content in a pipe using dual-gamma attenuation. Designed for wet processing applications where material is conveyed as a slurry — coal preparation plants, mineral processing, and similar operations. Non-contact, continuous measurement with no sample extraction.
View full specifications →Model 410M Ash Analyzer
Measures ash content, belt weight, moisture, and heating value in real time on a conveyor belt using dual-gamma attenuation. Updates every 3 seconds. Proven in coal, cement, biomass, and bulk material handling.
View full specifications →Model 730 Full Stream Elemental Analyzer
Full elemental analysis of the complete material stream on a conveyor belt using PGNAA with a Cf-252 neutron source. Measures ash, BTU, sulfur, moisture, and all major elemental oxides simultaneously. Updates every 30 seconds. The most complete online measurement available for coal, cement, biomass, and minerals.
View full specifications →Not sure which analyzer fits?
Tell us your material, conveyor configuration, and what you need to measure. We'll recommend the right instrument and provide a budgetary estimate.
Request a Quote